Determination of chloride in admixtures and aggregates for concrete by flow injection potentiometry

Jaroon Junsomboon, Jaroon Jakmunee

Abstract


A simple flow injection system using three 3-way solenoid valves as an electric control injection valve and with a simple home-made chloride ISE based on Ag/AgCl wire as a sensor for determination of chloride in admixtures and aggregates for cement has been developed. A liquid sample or an extract was injected into a water carrier stream which was then merged with 0.1 M KNO3 stream and flowed through a flow cell where the solution will be in contact with the sensor, producing a potential change recorded as a peak. A linear calibration graph in range of 10 - 100 mg L-1 was obtained with a detection limit of 2 mg L-1. Relative standard deviation for 7 replicates injecting of 20, 60 and 90 mg L-1 chloride solution was 1.0 ,1.2 and 0.6 % respectively. Sample throughput of 60 h-1 was achieved with the consumption of 1 mL each of electrolyte solution and water carrier. The developed method was validated by the British Standard methods.

 

บทคัดย่อ


วิธีใหม่ในการวิเคราะห์หาปริมาณคลอไรด์ในน้ำยาผสมคอนกรีตและวัสดุผสมสำหรับคอนกรีตได้ถูกพัฒนาขึ้น โดยใช้ระบบโฟลอินเจคชันอย่างง่ายซึ่งใช้โซลินอยด์วาล์วสามทางที่ควบคุมด้วยไฟฟ้าเป็นอุปกรณ์ในการฉีดสาร และพัฒนาขั้วไฟฟ้าเลือกจำเพาะคลอไรด์ไอออนที่สามารถสร้างได้ง่ายจากลวดเงินมาเป็นตัวเซ็นเซอร์ โดยสารตัวอย่างที่เป็นของเหลวหรือสารละลายที่ได้จากการสกัดตัวอย่างของแข็งจะถูกฉีดเข้าสู่กระแสตัวพา (น้ำ) ซึ่งจะไหลไปรวมกับสารละลาย 0.1 โมลาร์ โพแทสเซียมไนเตรต และไหลผ่านเข้าไปยังส่วนที่ตรวจวัด ซึ่งเมื่อสารละลายสัมผัสกับตัวเซ็นเซอร์จะทำให้เกิดการเปลี่ยนแปลงศักย์ไฟฟ้าและถูกบันทึกออกมาเป็นพีค สามารถสร้างกราฟมาตรฐานในช่วง 10 - 100 มิลลิกรัมต่อลิตร โดยมีขีดจำกัดของการตรวจวัดที่ 2 มิลลิกรัมต่อลิตร ค่าเบี่ยงเบนมาตรฐานสัมพัทธ์โดยทำการฉีดสารละลายมาตรฐานคลอไรด์ที่ความเข้มข้น 20, 60 และ 90 มิลลิกรัมต่อลิตรจำนวน 7 ซ้ำ เท่ากับ 1.0, 1.2 และ 0.6 % ตามลำดับ วิธีนี้มีอัตราการวิเคราะห์ตัวอย่าง 60 ตัวอย่างต่อชั่วโมง โดยใช้สารละลายอิเล็คโตรไลต์และน้ำที่เป็นกระแสตัวพาอย่างละ 1 มิลลิลิตรต่อการวิเคราะห์ 1 ตัวอย่าง วิธีที่พัฒนาขึ้นมีความถูกต้องเทียบเท่ากับวิิธีมาตรฐานอังกฤษ


Full Text:

PDF

Refbacks

  • There are currently no refbacks.