Method validation for determination of lead and cadmium in natural water using flame atomic absorption spectrometry (FAAS)

Angwara Poolkasem, Neeranart Changthong

Abstract


The method validation for determination of lead and cadmium in natural water, i.e. deep well water, rain and river water was investigated by flame atomic absorption spectrometry using the modified method based on AWWA 21st Ed., 2005 prior to the use in routine work. The characteristics of the method showed that the linear range of lead (Pb) and cadmium (Cd) were 0.1 – 1.5 mgL-1 and 0.02 – 0.5 mgL-1, the detection limits were 0.02 and 0.005 mgL-1, and the limits of quantitation were 0.1 mgL-1 and 0.02 mgL-1, respectively. Percentage recovery of lead and cadmium were 91-110% and 98-105% respectively. Relative standard deviations for both elements were between 0.8-3.2. The percentage recovery and relative standard deviation were within acceptance limit. In addition, the percentage measurement uncertainties at 95% confidence level of cadmium and lead were less than 15% throughout concentrations of working range that subjected to the target uncertainty. Therefore, this validated method was fit for the intended use.

 

บทคัดย่อ


การตรวจสอบความสมเหตุสมผลของวิธีวิเคราะห์หาปริมาณตะกั่ว และแคดเมียมในน้ำ ธรรมชาติ 3 ชนิด ได้แก่ น้ำบาดาล น้ำฝน น้ำแม่น้ำ ดำเนินการตามวิธีที่ปรับจากวิธีมาตรฐาน AWWA 21stEd.(2005) โดยใช้เทคนิค เฟรมอะตอมมิคแอบซอร์พชั่นสเปคโตรเมทตรี เพื่อนำมาใช้ในการทดสอบตัวอย่างน้ำต่อไป จากการศึกษาช่วงความเป็นเส้นตรงของวิธีวิเคราะห์ตะกั่ว พบว่ามีความเป็นเส้นตรงอยู่ในช่วง 1.5-0.1 มิลลิกรัมต่อลิตร ส่วนแคดเมียม อยู่ในช่วง 0.5-0.02 มิลลิกรัมต่อลิตร และค่าขีดจำกัด การตรวจวัดเท่ากับ 0.02 มิลลิกรัมต่อลิตร และ 0.005 มิลลิกรัม ต่อลิตร ตามลำดับ ส่วนค่าขีดจำกัดการตรวจหาปริมาณสำหรับตะกั่วและแคดเมียมเท่ากับ 0.1 มิลลิกรัมต่อลิตร และ 0.02 มิลลิกรัมต่อลิตรตามลำดับ ในการศึกษาความลำเอียงและความเที่ยงของวิธีสำหรับตะกั่วและแคดเมียม โดยใช้ตัวอย่างที่เติมสารละลายมาตรฐาน 3 ระดับความเข้มข้น พบว่ามีค่าคืนกลับอยู่ในช่วงร้อยละ 110-91 และ 105-98 และมีค่าความเบี่ยงเบนมาตรฐานสัมพัทธ์อยู่ระหว่าง 3.2-0.8 ตามลำดับ ค่าคืนกลับและค่าความเบี่ยงเบนมาตรฐานสัมพันธ์ที่ได้มีค่าอยู่ในเกณฑ์การยอมรับ และเมื่อคำนวณค่าความไม่แน่นอนของการวัดที่ระดับความเชื่อมั่นร้อยละ 95 ของตะกั่วและแคดเมียม พบว่า มีค่าน้อยกว่าร้อยละ 15 ซึ่งเป็นค่าเป้าหมายที่กำหนดไว้ ดังนั้นจึงสรุปได้ว่าวิธีการวิเคราะห์นี้เหมาะกับการใช้งานตามวัตถุประสงค์


Full Text:

PDF

Refbacks

  • There are currently no refbacks.